Продукция

NVM Express

NVM Express

NVM Express is a scalable host controller interface designed to address the needs of Enterprise, Data Center and Client systems for supporting chip-to-chip, board-to-board, adapter and distance solutions. The protocol can efficiently use interconnect and fabric technologies such as PCI Express, Ethernet and Fibre Channel. Teledyne LeCroy provides protocol analysis, emulation, exerciser and other test equipment to service all NVMe storage applications.
Summit T416 Analyzer The Summit T416 is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.
Summit T3-16 Analyzer The Summit T3-16 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8, x16 lane widths
Summit T3-8 Analyzer The Summit T3-8 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8 lane widths
Summit T34 Analyzer The Summit T34 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic data rates for x1, x2, x4 lane widths
Summit T28 Analyzer The Summit T28 Protocol Analyzer captures, decodes and displays PCIe 2.5GT/s and 5GT/s data rates for x1, x2, x4, x8 lane widths
Summit T24 Analyzer The Teledyne LeCroy Summit T24 PCI Express analyzer is for customers developing PCIe 1.0 or 2.0 x4 lane width server, workstation, desktop, graphics, storage, and network card applications.
Summit Z3-16 Exerciser with SMBus Support The Summit Z3-16 with SMBus Support is a critical test and verification tool intended to assist engineers in developing and improving the reliability of their systems. The exerciser can emulate PCI Express root complexes or device endpoints, allowing new designs to be tested against corner case issues. In addition, it can emulate SMBus traffic as a master or slave.
BitTracer The BitTracer Logic Display is a software option that runs on the Teledyne LeCroy Summit PCI Express Protocol Analyzers. BitTracer offers developers a physical layer view of PCI Express traffic, similar to what might be displayed on a logic analyzer, but provides this capability on a protocol analyzer. This means that developers can view bit stream traffic before it is decoded to high-level packets, to better understand where signal integrity issues may be causing data corruption.
PCIe Compliance Testing Teledyne LeCroy offers an integrated and automated compliance testing system, including the Protocol Test Card Platform, approved by the PCI-SIG as a standard tool for compliance testing for developers working with the PCIe 3.0 specification.
NVMe Testing The NVMe tests are designed to determine if a product conforms to specifications defined in the NVM Express . Successful completion of these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function properly in a NVM Express environment.
PCI Express host interface SSD/Drive Decode Support Teledyne LeCroy has been an industry leader in storage protocol analysis. The storage SSD/Drive technology is now moving towards a PCI Express host based interface. Teledyne LeCroy supports the following:

-NVM Express
-SCSI Express
-SATA Express
PCI Express Test Platform with SMBus Support The Summit Z3-16 Test Platform with SMBus Support allows the Summit Z3-16 to act as a host emulator, and provides a general purpose test backplane and interposer for testing Gen3, Gen2 or Gen1 hosts and devices. In addition, it supports the Summit Z3-16 with SMBus Support by providing SMBus tapping connectivity.
PXP-100B Test Platform The Teledyne LeCroy PXP-100B Test Platform provides a convenient means for testing PCIe 2.0 add-in cards with a self-contained portable and powered passive backplane. The PXP-100B provides power required for both cards under test, and an interposer can be used for connection to a protocol analyzer.
Summit T48 Analyzer The Summit T48 protocol Analyzer is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.
Teledyne LeCroy is the main supplier of protocol analyzers and exercisers to companies developing SSD and other similar storage products using the new NVMe, SATA Express and SCSI Express high-speed serial data standards. Protocol analyzers and exercisers are used by developers and validation engineers to directly record and examine data traffic on serial data communication links between devices and systems. This equipment enables developers to reduce debug and test schedules, lower engineering development costs on new products and meet aggressive time-to-market requirements.

Title Time
NVMe Protocol Analysis Features for Storage Development and Test 36:27
As storage developers make the transition from legacy SAS and SATA protocol-based SSDs to the more advanced NVMe and SATA Express technologies, they are encountering limitations in available design and test tools including limited trace recording times and a lack of standardized analysis reports for PCIe-based storage. These two issues are significant for the newer technologies of NVMe and SATA Express due to the following:

High performance SSD testing can require recording data traffic beyond a few minutes. This is not possible for many protocol analyzers due to limitations in their recording architectures.
While some test tool suppliers have claimed support for the NVMe and SATA Express protocols, support for these protocols has remained minimal. This has hampered developer's productivity due to the use of reporting systems designed for the older technologies, which are not optimized for quality testing on NVMe and SATA Express products.
The Summit T34 protocol analyzer, specifically targeted at PCIe storage applications, now supports long trace recordings with a new NVMe Enhanced Mode. The Summit T34 can also be configured with up to 64 GB of trace recording memory. NVMe Enhanced Mode builds on and optimizes the existing deep buffer memory to allow users long recording time capability. Depending on the speed of the DUT (Device Under Test), the recording time can be maximized to up to several hours for a single trace capture. This feature is useful for tasks such as measuring performance or determining how well your Queue handling algorithms are functioning. An example of the metrics that are now available include the ability to measure the NVMe queue distribution over a sustained period of time. The ability to gather queue behavior for long periods helps driver and OS developers fine tune their applications and balance queue loads for optimized product performance.

With over a decade of experience in providing PCI Express, SAS/SATA and other serial data protocols with standardized error analysis and product performance reports, Teledyne LeCroy has now created an NVMe and SATA Express SSD Performance and Analysis capability. Trace Expert™, a new feature in the PCIe Protocol Suite, creates a detailed report that the SSD industry requires to obtain a common understanding of how their SSD or storage systems are operating and includes information on the necessary PCIe based components. Information such as NVMe queues, commands, doorbell and control registers and many other metrics are captured, analyzed and organized into a detailed report providing developers a comprehensive status document for their products including a wide range of performance statistics.

In addition to the standard storage protocols, all of our NVMe platforms also fully support, Trusted Computer Group (TCG), Single Root I/O Virtualization (SRIOV), Multi-Root I/O Virtualization (MRIOV) and Address Translation Services (ATS). A full list of capabilities, views and reports can be found on the product pages (listed below) for each of our analyzers.

NVMe over PCIe Specification Decoding and Analysis - NVMe Initialization Decoding
• Decode NVMe Commands
• Analyze NVMe Queues
• NVMe Multiple Pointer Based Transactions
• NVMe Power Management
• Extract the PCIe SSD Base Address automatically
Teledyne LeCroy is the main supplier of protocol analyzers and exercisers to companies developing SSD and other similar storage products using the new NVMe, SATA Express and SCSI Express high-speed serial data standards. Protocol analyzers and exercisers are used by developers and validation engineers to directly record and examine data traffic on serial data communication links between devices and systems. This equipment enables developers to reduce debug and test schedules, lower engineering development costs on new products and meet aggressive time-to-market requirements.

Title Time
NVMe Protocol Analysis Features for Storage Development and Test 36:27
As storage developers make the transition from legacy SAS and SATA protocol-based SSDs to the more advanced NVMe and SATA Express technologies, they are encountering limitations in available design and test tools including limited trace recording times and a lack of standardized analysis reports for PCIe-based storage. These two issues are significant for the newer technologies of NVMe and SATA Express due to the following:

High performance SSD testing can require recording data traffic beyond a few minutes. This is not possible for many protocol analyzers due to limitations in their recording architectures.
While some test tool suppliers have claimed support for the NVMe and SATA Express protocols, support for these protocols has remained minimal. This has hampered developer's productivity due to the use of reporting systems designed for the older technologies, which are not optimized for quality testing on NVMe and SATA Express products.
The Summit T34 protocol analyzer, specifically targeted at PCIe storage applications, now supports long trace recordings with a new NVMe Enhanced Mode. The Summit T34 can also be configured with up to 64 GB of trace recording memory. NVMe Enhanced Mode builds on and optimizes the existing deep buffer memory to allow users long recording time capability. Depending on the speed of the DUT (Device Under Test), the recording time can be maximized to up to several hours for a single trace capture. This feature is useful for tasks such as measuring performance or determining how well your Queue handling algorithms are functioning. An example of the metrics that are now available include the ability to measure the NVMe queue distribution over a sustained period of time. The ability to gather queue behavior for long periods helps driver and OS developers fine tune their applications and balance queue loads for optimized product performance.

With over a decade of experience in providing PCI Express, SAS/SATA and other serial data protocols with standardized error analysis and product performance reports, Teledyne LeCroy has now created an NVMe and SATA Express SSD Performance and Analysis capability. Trace Expert™, a new feature in the PCIe Protocol Suite, creates a detailed report that the SSD industry requires to obtain a common understanding of how their SSD or storage systems are operating and includes information on the necessary PCIe based components. Information such as NVMe queues, commands, doorbell and control registers and many other metrics are captured, analyzed and organized into a detailed report providing developers a comprehensive status document for their products including a wide range of performance statistics.

In addition to the standard storage protocols, all of our NVMe platforms also fully support, Trusted Computer Group (TCG), Single Root I/O Virtualization (SRIOV), Multi-Root I/O Virtualization (MRIOV) and Address Translation Services (ATS). A full list of capabilities, views and reports can be found on the product pages (listed below) for each of our analyzers.

NVMe over PCIe Specification Decoding and Analysis - NVMe Initialization Decoding
• Decode NVMe Commands
• Analyze NVMe Queues
• NVMe Multiple Pointer Based Transactions
• NVMe Power Management
• Extract the PCIe SSD Base Address automatically