Продукция

PCI/PCI-X Hot Swap Extenders

PCI/PCI-X Hot Swap Extenders

PCIBX32-3
  • 32 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 3.3V keyed top connector
  • 3.3V<=>5V Signal Level Conversion
  • Software programmable via parallel port to:
    • Control Power on/off
    • Detect for properly inserted UUT cards
    • Read bus frequency
    • Read Voltages and Current draw by UUT
    • Program RST# duration
    • Program +5V turn on slew rate
    • Read status of RST, M66EN, PME#
    • Control +3.3Vaux power
  • On-board 3.3V source, 3 Amps
  • Board select jumper for multiple boards operation, 2 boards per system
  • PCI-X support
  • Auxiliary measurement points for +5V, +3.3V and +12V current measurement, using a voltmeter
  • Short circuit protection
  • Power may be controlled via Mechanical Switch or Software Control
  • Recommend accessories
    • PCIMINI-3 - 32 bit Connector saver
    • PCIMINI-5 - 32 bit Connector saver and converter to 5V key
    • PCIMINI64-3 - 64 bit Connector Saver
    • PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
    • 3x25P - Parallel Port Cable for controlling up to 2 extender cards
  • Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes

PCIBX32-5
  • 32 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 5V keyed top connector
  • 3.3V<=>5V Signal Level Conversion
  • Software programmable via parallel port to:
    • Control Power on/off
    • Detect for properly inserted UUT cards
    • Read bus frequency
    • Read Voltages and Current draw by UUT
    • Program RST# duration
    • Program +5V turn on slew rate
    • Read status of RST, M66EN, PME#
    • Control +3.3Vaux power
  • On-board 3.3V source, 3 Amps
  • Board select jumper for multiple boards operation, 2 boards per system
  • PCI-X support
  • Auxiliary measurement points for +5V, +3.3V and +12V current measurement, using a voltmeter
  • Short circuit protection
  • Power may be controlled via Mechanical Switch or Software Control
  • Recommend accessories
    • PCIMINI-3 - 32 bit Connector saver
    • PCIMINI-5 - 32 bit Connector saver and converter to 5V key
    • PCIMINI64-3 - 64 bit Connector Saver
    • PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
    • 3x25P - Parallel Port Cable for controlling up to 2 extender cards
  • Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes

PCIBX64-3
  • 64 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 3.3V keyed top connector
  • 3.3V<=>5V Signal Level Conversion
  • Software programmable via parallel port to:
    • Control Power on/off
    • Detect for properly inserted UUT cards
    • Read bus frequency
    • Read Voltages and Current draw by UUT
    • Program RST# duration
    • Program +5V turn on slew rate
    • Read status of RST, M66EN, PME#, 32/64 Bit Operation
    • Control +3.3Vaux power
  • On-board 3.3V source, 3 Amps
  • Board select jumper for multiple boards operation, 2 boards per system
  • PCI-X support
  • Auxiliary measurement points for +5V, +3.3V and +12V current measurement, using a voltmeter
  • Short circuit protection
  • Power may be controlled via Mechanical Switch or Software Control
  • Recommend accessories
    • PCIMINI64-3 - 64 bit Connector Saver
    • PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
    • 3x25P - Parallel Port Cable for controlling up to 2 extender cards
  • Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes

PCIBX64-5
  • 64 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 5V keyed top connector
  • 3.3V<=>5V Signal Level Conversion
  • Software programmable via parallel port to:
    • Control Power on/off
    • Detect for properly inserted UUT cards
    • Read bus frequency
    • Read Voltages and Current draw by UUT
    • Program RST# duration
    • Program +5V turn on slew rate
    • Read status of RST, M66EN, PME#, 32/64 Bit Operation
    • Control +3.3Vaux power
  • On-board 3.3V source, 3 Amps
  • Board select jumper for multiple boards operation, 2 boards per system
  • PCI-X support
  • Auxiliary measurement points for +5V, +3.3V and +12V current measurement, using a voltmeter
  • Short circuit protection
  • Power may be controlled via Mechanical Switch or Software Control
  • Recommend accessories
    • PCIMINI64-3 - 64 bit Connector Saver
    • PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
    • 3x25P - Parallel Port Cable for controlling up to 2 extender cards
  • Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes

TAB2LP-3
  • 64 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 3.3V keyed top connector
  • 3.3V<=>5V Signal Level Conversion
  • Software programmable via parallel port to:
    • Control Power on/off
    • Detect for properly inserted UUT cards
    • Read bus frequency
    • Read Voltages and Current draw by UUT
    • Program RST# duration
    • Program +5V turn on slew rate
    • Read status of RST, M66EN, PME#, 32/64 Bit Operation
    • Control +3.3VAux power
  • Board select jumper for multiple boards operation, 2 boards per system.
  • PCI-X support
  • Short circuit protection
  • Power may be controlled via Mechanical Switch (on Interface board) or Software Control
  • Recommend accessories
    • PCIMINI64-3 - 64 bit Connector Saver
    • PCIMINI64-5 - 64 bit Connector Saver and converter to 5V key
    • 3x25P - Parallel Port Cable for controlling up to 2 extender cards
  • Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes

TAB2LP-5
  • 64 bit Hot Swap 66 MHz, PCI/PCI-X extender card, 5V keyed top connector
  • 3.3V<=>5V Signal Level Conversion
  • Software programmable via parallel port to:
    • Control Power on/off
    • Detect for properly inserted UUT cards
    • Read bus frequency
    • Read Voltages and Current draw by UUT
    • Program RST# duration
    • Program +5V turn on slew rate
    • Read status of RST, M66EN, PME#, 32/64 Bit Operation
    • Control +3.3VAux power
  • Board select jumper for multiple boards operation, 2 boards per system.
  • PCI-X support
  • Short circuit protection
  • Power may be controlled via Mechanical Switch or Software Control
  • Recommend accessories
    • PCIMINI64-3 - 64 bit Connector Saver and converter to 3.3V key
    • PCIMINI64-5 - 64 bit Connector Saver
    • 3x25P - Parallel Port Cable for controlling up to 2 extender cards
  • Easy accessible test points are provided for all PCI bus signals for connection to scope or logic analyzer probes