Продукция

PCI Express

PCI Express

PCI Express (PCIe) has become the leading interconnect technology to succeed the Peripheral Connect Interface (PCI) architecture. Teledyne LeCroy released the first PCIe protocol analyzer in February of 2003. Teledyne LeCroy also offers oscilloscope solution on their SDA 13000 analyzer designed to perform compliance testing at the phyical layer.
ARINC429bus DSymbolic The ARINC 429 Decode (D) option provides Symbolic decode with transparent color-coded decode overlays, protocol tables, and search capabilities.
ARINC429bus DME Symbolic The ARINC 429 Decode (D) and Decode, Measure/Graph and Eye Diagram (DME) options both provide Symbolic decode with transparent color-coded decode overlays, protocol tables, and search capabilities. Measure/Graph (M) provides automated protocol-specific bus performance, timing, and digital data extraction measurements and waveforms. Eye Diagram (E) provides one button eye diagram creation from the physical layer signal, various eye measurements and pass/fail indications/debug.
QPHY-BroadR-Reach Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected vehicles of the future. QPHY-BroadR-Reach automates testing and validation of 100 Mb/s Automotive Ethernet, which is described in both the BroadR-Reach and 100Base-T1 (IEEE 802.3bw) specifications.
Summit T416 Analyzer The Summit T416 is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.
Summit Z416 Protocol Exerciser he Summit Z416 is a PCIe 4.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z416 can emulate PCI Express 4.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.
AudioBus - I2S Teledyne LeCroy’s Serial AudioBus trigger, decode, and graph package provides all the tools needed to properly analyze and debug digital audio buses. Teledyne LeCroy’s solution addresses the I2S, LJ, RJ, and TDM variations of the audio bus standard.
MDIO Decode The Media Data Input/Output (MDIO) decoder provides a fast and easy way to understand and correlate MDIO bus traffic to the management of PHYs or physical layer devices in media access controllers (MACs).
10-Gigabit Ethernet Decode The 10-Gigabit Ethernet decode option for Teledyne LeCroy oscilloscopes provides link layer decode information annotated on the 10-Gigabit physical layer waveform. This provides the ability to view protocol traffic on the oscilloscope. It also aids in debugging problems that are not solely analog or digital in nature - issues not evident with a Protocol Analyzer
14GBIT-80B-SYMBOL-TD Rapidly pinpoint and debug problems with NRZ, 8b/10b and 64b/66b signals using the high-speed serial trigger and decode options. Hardware trigger products with maximum bitrates of 6.5 and 14.1 Gbps are available for WaveMaster 8 Zi-A, LabMaster 9 Zi-A and LabMaster 10 Zi series oscilloscopes, and include 8b/10b and 64b/66b decoders.
1553 TD The MIL-STD-1553 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
1553 TDME The MIL-STD-1553 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
8B10B 8b10b Decode Option
8b10b WR6Zi 8b10b WR6Zi Decode Option
Automotive Bundle Trigger and Decode The Automotive Bundle Trigger and Decode is offered for selected oscilloscope product lines only. In all supported product lines, it contains the capabilities included in CANbus TD and LINbus TD, and some oscilloscope product lines also support FlexRaybus TD as well (reference oscilloscope product lines for complete support). For more information on this product, please see the product pages for CANbus TD, LINbus TD, and FlexRaybus TD.
CAN FDbus TD The CAN FD Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities for both CAN and CAN FD.
CAN FDbus TDME The CAN FD Trigger, Decode, Measure/Graph and Eye Diagram (TDME) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug for both CAN and CAN FD. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value.
CAN FDbus TDME Symbolic The CAN FD Trigger, Decode, Measure/Graph and Eye Diagram solution with Symbolic support (TDME Symbolic) provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug for both CAN and CAN FD. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value.
CANbus TD performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
CANbus TDME The CAN Trigger, Decode, Measure/Graph and Eye Diagram (TDME) solution provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug.
CANbus TDME Symbolic The CAN Trigger, Decode, Measure/Graph and Eye Diagram solution with Symbolic CAN support (TDME Symbolic) provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph (M) capability with automated measurement and graphing tools, and Eye Diagram (E) capability for physical layer signal assessment and debug. Symbolic DBC files may be used to set up the trigger, display symbolic decodes, and select parameters for serial digital data extraction to an analog value
D-PHYbus D - Decode option The MIPI D-PHY decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
D-PHYbus DP - Decode and Physical layer test option The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
DigRF 3G bus The DigRF 3G decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF 3G decode adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
DigRF v4 bus The DigRF 3G and v4 decode are the ideal tools for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF decodes add a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
Embedded System Bundle TD The Embedded Bundle Trigger and Decode (TD) contains the capabilities included in the I2Cbus, SPIbus, and UART-RS232bus TD products. For more information on this product, please see the product pages for I2Cbus TD, SPIbus TD, and UART-RS232bus TD.
Embedded System Bundle TDME The Embedded Bundle Trigger, Decode, Measure/Graph and Eye Diagram(TDME) contains the capabilities included in the I2Cbus, SPIbus, and UART-RS232bus TDME products. For more information on this product, please see the product pages for I2Cbus TDME, SPIbus TDME, and UART-RS232bus TDME.
Ethernet Decode Ethernet Decode Ethernet decoding provides protocol awareness to the oscilloscope for fast debugging.
Fibre Channel Decode The FCbus D decode annotation option is available for most Teledyne LeCroy oscilloscopes. It permits link and data layer decoding of 1, 2, 4, or 8GFC (1.0625 Gb/s to 8.5 Gb/s) Fibre Channel physical layer signals.
FlexRaybus TD The FlexRay Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
FlexRaybus TDMP The FlexRay Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDMP) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDMP option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Physical Layer and Eye Diagram (P) capability for advanced physical layer signal assessment and debug.
HSPT Option for 4-6 GHz Oscilloscopes & Disk Drive Analyzers
I2Cbus TD The I2C Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
I2Cbus TDME The I2C Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers, transparent color-coded decode overlays, protocol tables, and search capabilities, Measure/Graph capability with automated measurement and graphing tools, and Eye Diagram capability for physical layer signal assessment and debug.
LINbus TD The LIN Trigger Decode (TD) solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
LINbus TDME The LIN Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDME) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
M-PHYbus D - Decode option The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
M-PHYbus DP - Decode and Physical layer test option The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
Manchester Decode Manchester coding is a line code in which the encoding of each data bit has at least one transition and 1s and 0s have equal bit width and therefore has no DC component. Manchester signals are self-clocking, which means that a clock signal can be recovered from the encoded data. Manchester Configurable protocol decoder enables grouping bits using various combinations of bit rate, polarity, idle condition, time out and more to decipherable messages. It allows decode of various protocols developed using Manchester encoding scheme.
NRZbus D NRZ (non-return-to-zero) line code is a binary code in which 1s are represented by one significant condition (usually a positive voltage) and 0s are represented by some other significant condition (usually a negative voltage), with no other neutral or rest condition. NRZ Configurable protocol decoder enables grouping bits using various combinations of bit rate, polarity, idle condition, time out and more to decipherable messages. It allows decode of various protocols developed using NRZ encoding scheme.
PCIe Decode The PCIEbus D option provides comprehensive PCI Express Gen1.x protocol decode for most efficient debug.
ProtoSync The ProtoSync option further leverages the supported Teledyne LeCroy decode annotation options (PCIEbus D, USB3bus D, USB2bus D, USB2 HSICbus D, SATAbus D, SASbus D, FCbus D) installed on the oscilloscope.
SAS bus D The SASbus D decode annotation option is available for most Teledyne LeCroy oscilloscopes. It permits link and data layer decoding of 1.5, 3, 6, or 12 Gb/s SAS physical layer signals. Decode information is annotated on the physical layer waveform. Various sections of the protocol are color-coded to make it easy to understand the protocol traffic.
SATA Trigger and Decode The SATAbus TD option provides comprehensive SATA 1.5 and 3 Gb/s protocol triggering in a WaveRunner 6 Zi oscilloscope using a true hardware protocol trigger for most efficient debug.
SENTbus D High-resolution SENT sensor and ECU message frames are intuitively decoded on the waveform, provided in an interactive table, and payload content search tools make debugging fast and effective.
SpaceWirebus D The SpaceWire decode adds a unique set of tools to your Teledyne LeCroy oscilloscope that simplifies the design, debug, and maintenance of SpaceWire systems. The high speed SpaceWire data stream is annotated directly on the physical layer waveforms. Various sections of the protocol are color-coded to make it easy to understand the protocol traffic. The decoder provides an interactive table, search, and zoom to make debugging fast and effective.
SPIbus TD The SPI Trigger solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
SPMI Decode The MIPI System Power Management Interface (SPMI) decoder provides a fast and easy way to understand and correlate SPMI bus traffic to DC power rails and power management IC (PMIC) operations in mobile, handheld, and battery-powered embedded systems.
UART-RS232bus TD The UART and RS-232 Trigger Decode solution provides high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
UART-RS232bus TDME The UART and RS-232 Trigger Decode (TD) and Trigger, Decode, Measure/Graph and Physical Layer (TDME) solutions both provide high performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities. The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
UNIPRObus D The MIPI UniPro Protocol Decoder analyzes acquired M-PHY analog waveforms and provides insight into multiple levels of UniPro protocol information. Data and Control frames are presented in an intuitive table format, where selecting a frame expands its content to a color-coded symbolic level, simultaneously creating a zoom. Decode annotation information is displayed on the physical layer waveform for a quick reference.
USB 3.0 bus The USB 3.0 decode option for Teledyne LeCroy oscilloscopes provides link layer decode information annotated on the USB 3.0 physical layer waveform. This provides the ability to view protocol traffic on the oscilloscope and verify that the link is alive and transmitting properly. It also aids in debugging problems that are not solely analog or digital in nature, such as interoperability issues, uncertain error causes, and physical layer issues not evident with a Protocol Analyzer.
USB2-HSICbus D The comprehensive and intuitive deocde and easy to navigate table display enable a powerful toolset to quickly debug a USB 2.0 HSIC powered system. Combine it with ProtoSync to get a full view of all the USB 2.0 layers.
USB2bus TD performance triggers and transparent color-coded decode overlays, protocol tables, and search capabilities.
USB2bus TDME The USB2 Trigger, Decode, Measure/Graph and Physical Layer (TDME) solution provides high performance triggers (T) and transparent color-coded decode overlays, protocol tables, and search capabilities (D). The TDME option also provides Measure/Graph (M) capability with automated measurement and graphing tools and Eye Diagram (E) capability for physical layer signal assessment and debug.
DDR Debug Toolkit The DDR Debug Toolkit provides test, debug and analysis tools for the entire DDR design cycle. The unique DDR analysis capabilities provide automatic Read and Write burst separation, bursted data jitter analysis and DDR-specific measurement parameters.
ET-PMT Electrical Telecom Mask Test Package
GRL-USB-PD GRL-USB-PD software provides a simple and efficient way to perform USB-PD electrical parametric and protocol measurements. GRL-USB-PD provides waveform visibility and protocol analysis making it ideal for design and debug of USB Type-C Power Delivery silicon and end products.
GRL-USB-PD-C1 GRL-USB-PD-C1 is a flexible test controller, designed for USB-PD Compliance testing of the Unit Under Test (UUT) and more.
LNES Low Noise Edge Shaper
QPHY-10GBase-KR The Teledyne LeCroy QPHY-10GBase-KR solution automates testing for 10Gigabite Ethernet Copper Backplane base on the IEEE 802.3ap specifications. The test framework simplifies the test setup and execution of generic and common test requirements such as jitter separation, rise/fall time and transmitter equalization parameters. The guided wizard prompts the user to for specification required patterns and takes the measurements accordingly. The test report includes the test results pass/fail summary, margins and limits, as well as waveforms and measurements used during the test process.
QPHY-10GBASE-T QPHY-10GBASE-T automated compliance test software performs electrical compliance testing of the Physical Media Attachment (PMA) for 10GBASE-T Ethernet PHY, based on IEEE802.3-2008 requirements.
QPHY-DDR2 The Teledyne LeCroy QPHY-DDR2 Test Solution is the best way to characterize DDR2 memory interfaces. Capable of performing measurements on 400 MHz, 533 MHz, 667 MHz, 800 MHz, 1066 MHz and custom speed grades, QPHY-DDR2 has a full suite of Clock, Electrical and Timing tests as specified by the JEDEC Specification and Intel JEDEC Specifications Addendums.
QPHY-DDR3 The Teledyne LeCroy QPHY-DDR3 Test Solution is the best way to characterize DDR3, DDR3L, and LPDDR3 memory interfaces. Capable of performing measurements on 800 MT/s, 1066 MT/s, 1333 MT/s, 1600 MT/s, 1866 MT/s, 2133 MT/s and custom speed grades, QPHY-DDR3 has a full suite of Clock, Electrical, and Timing tests as specified by the JEDEC Specification.
QPHY-DDR4 DDR4 is an evolutionary upgrade from DDR3. It introduces data transfer rates which are nearly double the DDR3 transfer rates, ranging from 1.6 GT/s up to 3.2 GT/s. DDR4's higher transfer rates and lower operating voltage have driven new test methodologies and test requirements which were not previously required for DDR3 in order to ensure proper signal fidelity. QPHY-DDR4 has a full suite of Clock, Electrical, and Timing tests as specified by the JEDEC Specification which will aid in DDR4 design validation.
QPHY-DisplayPort The QPHY-DisplayPort software option provides an automated test environment for running all of the normative real-time oscilloscope tests for sources in accordance with Version 1.2b of the Video Electronics Standards Association (VESA) DisplayPort PHY Compliance Test Specification, as well as tests for HBR3 signals at 8.1 Gbps.
QPHY-ENET Ethernet testing compliant with IEEE 802.3-2005 requires many test setups and connections and mask tests. Using Teledyne LeCroy QualiPHY-ENET these measurements are easy to setup and complete. Instructive connection diagrams and message boxes appear as pop ups on the oscilloscope screen. The connection diagram instructs the user how to change test fixture and jumper pins in order to do complete test. When the tests are complete, QualiPHY will generate a test report in PDF, HTML, or XML formats. Jitter and pulse mask tests are performed with automatic waveform alignment, and all test results feature pass/fail indicators corresponding to the standard being tested.
QPHY-HDMI2 automated and easy-to-use solution for HDMI transmitter testing in accordance with Version 2.0 of the HDMI Compliance Test Specification (including testing for version 1.4 devices).
QPHY-LPDDR2 The Teledyne LeCroy QPHY-LPDDR2 Test Solution is the best way to characterize LPDDR2 memory interfaces. Capable of performing measurements on 466 MHz, 533 MHz, 667 MHz, 800 MHz, 900 Mhz, 1066 MHz and custom speed grades, QPHY-LPDDR2 has a full suite of Clock, Electrical and Timing tests as specified by the JEDEC Specifications.
QPHY-MIPI-DPHY - D-PHY Compliance Package Test Solution provides automated control for Teledyne LeCroy oscilloscopes for performing transmitter physical layer tests as described by the MIPI Alliance Specification for D-PHY version 1.00.00
QPHY-MIPI-MPHY The QPHY-MIPI-MPHY Test Solution provides automated control of Teledyne LeCroy oscilloscopes for performing transmitter physical layer tests as described by the MIPI Alliance Specification for M-PHY version 3.0.
QPHY-MOST150 The Teledyne LeCroy QPHY-MOST150 compliance test package provides a highly automated and easy-to-use solution to MOST compliance testing. QPHY-MOST150 will perform all electrical compliance tests as defined in the MOST150 oPHY Automotive Physical Layer Sub-Specification Rev. 1.1 and MOST150 cPHY Automotive Physical Layer Sub-Specification Rev 1.0.
QPHY-MOST50 The Teledyne LeCroy QPHY-MOST50 compliance test package provides a highly automated and easy-to-use solution to MOST compliance testing. QPHY-MOST50 will perform all electrical compliance tests as defined in the MOST Electrical Physical Layer Specification Rev. 1.1.
QPHY-PCIe The Teledyne LeCroy QPHY-PCIe Test Solution provides automated control for Teledyne LeCroy oscilloscopes for performing the entire transmitter physical layer tests as described by the Card Electro-mechanical specification Rev 1.1 and 2.0
QPHY-PCIe3 Teledyne LeCroy QPHY-PCIe3 Test Solution provides automated control for Teledyne LeCroy oscilloscopes for performing transmitter physical layer tests as described by the PCI Express Base Specification Revision 3.0 Version 0.9 and the Card Electromechanical Specification Revision 3.0 Version 0.7.
QPHY-SAS2 The Teledyne LeCroy QPHY-SAS2 Test Solution provides automated control for the SDA 8 Zi series of oscilloscopes for performing all of the transmitter physical layer tests as described by version 1.01 of the UNH IOL Serial Attached SCSI (SAS) Consortium SAS-2 6Gb/s Physical Layer Test Suite. This specification covers targets and initiators running at 1.5 Gb/s, 3.0 Gb/s and 6.0 Gb/s.
QPHY-SAS3 The QPHY-SAS3 Test Solution provides automated control of the SDA 8 Zi-A and LabMaster 10 Zi oscilloscopes for performing all of the transmitter physical layer tests as described by the T10 SAS-3 specification. This specification covers targets and initiators running at 1.5 Gb/s, 3.0 Gb/s, 6.0 Gb/s, and 12.0 Gb/s.
QPHY-SATA-TSG-RSG for SATA compliance testing to be used in conjunction with the PeRT3. By leveraging the capabilities of both the oscilloscope and the PeRT3, QPHY-SATA-TSG-RSG can automatically perform all of the PHY, TSG, OOB, and RSG tests as described by the SATA UTD 1.5. Furthermore, QPHY-SATA-TSG can be configured to test Gen1, Gen2, and Gen3 SATA PUTs.
QPHY-SFI The Teledyne LeCroy QPHY-SFI solution automates testing for SFI base on the SFF 8431 specifications. The test framework simplifies the test setup and execution of generic and common test requirements such as jitter separation, rise/fall time and transmitter equalization parameters. The guided wizard prompts the user to for specification required patterns and takes the measurements accordingly. The test report includes the test results pass/fail summary, margins and limits, as well as waveforms and measurements used during the test process.
QPHY-USB The USB package provides a complete acquisition and analysis system for USB 2.0 devices, hosts, and hubs, as specified in the USB-IF USB 2.0 Electrical Test Specification. The test software implements a full set of electrical tests for USB 2.0, including High-, Full-, and Low-speed tests and is supported by Teledyne LeCroy’s QualiPHY automated test and reporting software.
QPHY-USB3-Tx-Rx SuperSpeed USB is one of most highly anticipated standards in several years. At 10x the data rate of USB 2.0 and with new features like CTLE (continuous time linear equalization) and reference channels, SuperSpeed USB will pose new challenges to implementers.
QPHY-USB3.1-Tx-Rx QPHY-USB3.1-Tx-Rx offers an automated test package for USB 3.1 transmitter and receiver compliance testing, characterization, and debug.
Summit T3-16 Analyzer The Summit T3-16 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8, x16 lane widths
Summit T3-8 Analyzer The Summit T3-8 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8 lane widths
Summit T34 Analyzer The Summit T34 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic data rates for x1, x2, x4 lane widths
Summit T28 Analyzer The Summit T28 Protocol Analyzer captures, decodes and displays PCIe 2.5GT/s and 5GT/s data rates for x1, x2, x4, x8 lane widths
Summit T24 Analyzer analyzer is for customers developing PCIe 1.0 or 2.0 x4 lane width server, workstation, desktop, graphics, storage, and network card applications.
Summit Z3-16 Exerciser with SMBus Support The Summit Z3-16 with SMBus Support is a critical test and verification tool intended to assist engineers in developing and improving the reliability of their systems. The exerciser can emulate PCI Express root complexes or device endpoints, allowing new designs to be tested against corner case issues. In addition, it can emulate SMBus traffic as a master or slave.
Protocol Test Card The Teledyne LeCroy Protocol Test Card (PTC) is a multimodal test board used for checking adherence to the protocol-oriented sections of the PCI Express 2.0 specification.
BitTracer The BitTracer Logic Display is a software option that runs on the Teledyne LeCroy Summit PCI Express Protocol Analyzers. BitTracer offers developers a physical layer view of PCI Express traffic, similar to what might be displayed on a logic analyzer, but provides this capability on a protocol analyzer. This means that developers can view bit stream traffic before it is decoded to high-level packets, to better understand where signal integrity issues may be causing data corruption.
PCIe Compliance Testing Teledyne LeCroy offers an integrated and automated compliance testing system, including the Protocol Test Card Platform, approved by the PCI-SIG as a standard tool for compliance testing for developers working with the PCIe 3.0 specification.
PCI Express host interface SSD/Drive Decode Support Teledyne LeCroy has been an industry leader in storage protocol analysis. The storage SSD/Drive technology is now moving towards a PCI Express host based interface. Teledyne LeCroy supports the following: -NVM Express -SCSI Express -SATA Express
PCI Express Test Platform with SMBus Support The Summit Z3-16 Test Platform with SMBus Support allows the Summit Z3-16 to act as a host emulator, and provides a general purpose test backplane and interposer for testing Gen3, Gen2 or Gen1 hosts and devices. In addition, it supports the Summit Z3-16 with SMBus Support by providing SMBus tapping connectivity.
PXP-100B Test Platform The Teledyne LeCroy PXP-100B Test Platform provides a convenient means for testing PCIe 2.0 add-in cards with a self-contained portable and powered passive backplane. The PXP-100B provides power required for both cards under test, and an interposer can be used for connection to a protocol analyzer.
Interposers and Probes The Summit product family includes a wide variety of Interposer systems, designed to reliably capture serial data traffic while minimizing perturbations in the serial data stream. Probes include interposers, which are designed to capture data traffic crossing the PCI Express card connector interface, and MidBus probes, which are designed to capture traffic flowing within a PCB.
TeleScan PE Software TeleScan PE is a no-cost PCI Express/NVMe configuration space Read/Write utility that allows the user to scan, decode, display and write to the PCI Express/NVMe configuration space registers.
LinkExpert LinkExpert provides protocol analyzer hardware control and management while displaying high level diagnostic information about communication between host systems and devices also known as Root Complexes and End-Points.
PCI Express 3.0 Test Suite Requirements for serial data testing unique to PCI Express Gen3 place new demands on the traditional physical layer test tools. Not only does the specification mandate that the receiver tester be protocol aware, but certain other characteristics of PCIe Gen3, such as dynamic equalization, essentially require combined physical/protocol layer test capabilities for validation and debug. Only Teledyne LeCroy has the comprehensive set of physical layer, protocol layer, and network analysis tools for complete PCIe Gen3 transmitter, receiver, and channel testing.
Summit T48 Analyzer The Summit T48 protocol Analyzer is Teledyne LeCroy's latest generation of protocol analyzers targeted at high speed PCI Express 4.0 I/O-based applications such as workstation, desktop, graphics, storage, and network card applications.
PCI Express Analysis Solutions
Protocol Analysis

Teledyne LeCroy introduced their PCI Express Analyzer technology in the spring of 2003 for Gen1 applications. Since that time the protocol analyzer has become an essential tool in many industry leader’s labs that have successfully brought PCI Express based products to market. Working with these companies has helped produce the right user interface and analysis features for PCI Express Protocol debugging and performance enhancement.

Teledyne LeCroy offers three protocol analyzer product lines (Summit™ , PETracer™ ML, Edge T1-4). The Summit T2-16 Analyzer is Teledyne LeCroy’s fourth generation architecture and highest performance platform. It provides full bidirectional support of x16, x8, x4, x2, and x1 at data rates up to 5 GT/s.With 8 GB of trace memory, it offers enough capacity for analyzing and recording extensive PCI Express data streams. Supporting lane widths up to x4 at 2.5 GT/s, the PETracer ML Analyzer has 2 GB of trace memory and offers outstanding performance for Gen1 PCI Express applications. For portability and ease-of-use the Edge T1-4 Analyzer offers Gen1 analysis and low cost form factor for add-in-boards applications

Teledyne LeCroy's PCI Express Protocol Analyzer solutions employ high impedance, non-intrusive probing technology thereby allowing fully unaltered data pass-through. In addition, it leverages the intuitive and powerful Teledyne LeCroy Trace expert software system, embedding a deep understanding of the PCI Express protocol hierarchy and intricacies and presents this knowledge to the user in a colorful, intuitive and easy to use graphical display, allowing users to quickly capture and validate PCI Express product designs. These analyzers enable IP, semiconductor, switch, software and system developers as well as add-on card vendors to quickly identify protocol violations and ultimately reduce development and debugging time.

Developers can use Teledyne LeCroy's PCI Express Protocol solutions to easily capture and decode PCI Express Transaction Layer Packets (TLPs), Data Link Layer Packets (DLLPs), and low-level link traffic, including Training Sequences and Skip Ordered-sets. Some of the errors detected include: 8b/10b errors, such as invalid symbols and incorrect running disparity; CRC errors; idle data errors; and EDB (End-of-Packet Bad) errors. They also provide a detailed display of split transactions, correlating requests transmitted from one PCI Express endpoint with completions received from the endpoint at the opposite end of the link.

Exercisers

The PCI Express exercisers assist with generating PCI Express transactions, observing behavior, and performing both stress testing and compliance testing. The Summit Z2-16 supports the new Specification 2.0 (“Gen2”) data rates of 5 GT/s across up to 16 lanes. The PETrainer ML Exerciser supports up to x4 lane widths at data rates of 2.5 GT/s. As complete solutions, both the Summit T2-16 and Summit Z2-16, or PETracer/Trainer™ systems give you the unique ability to record (capture) live traffic, modify the traffic, and then playback the exact data stream, or “script,” using the exerciser.

Protocol Test Card

Teledyne LeCroy offers an integrated and automated compliance testing system, including the Protocol Test Card, approved by the PCI-SIG® as a standard tool for compliance testing for developers working with the new Gen2 specification.

PCI Express Physical Layer Testing

The Teledyne LeCroy SDA 6020 Analyzer and PCI Express Compliance and Development software offer a complete test and debug. QPHY-PCIe provides a highly automated solution for PCI Express 1.1.

The Teledyne LeCroy SDA 13000 can perform PCI Express 2.0 Compliance Test and Debug. It can acquire and quickly analyze PCI Express 2.0 signals using the SigTest(PCI-SIG Compliance Utility). The SDA 13000 has the memory depth to acquire all required 1 million UI in a single acquisition. Waveforms can be saved in the TRC format and quickly analyzed by SigTest. Built into the standard SDA tools are the 14 Masks, 3 PLLs and 2 Jitter Filters specified by PCI-SIG.