Продукция

VirtualProbe

VirtualProbe

By using VirtualProbe, you can understand the characteristics of signals where a physical probe cannot be placed, such as inside of a package or at the end of an interconnect that doesn't physically exist. You can choose to remove effects caused by elements such as fixtures that are not be present in a production configuration, and also add the effects of a device that is to be included but for which only an S-parameter model exists. Use in conjunction with SDAIII products to complete your serial data analysis solution set.
SDA II Unleash the power of serial data analysis to understand and characterize your design, prove compliance, and determine why a device or host fails compliance.
SDAIII-CompleteLinQ signaling, designers of serial data systems require multi-lane analysis. Unleash the power of multi-lane SDA analysis to perform eye and jitter measurements on up to four lanes, simultaneously.
CBL-DE-EMBED Remove cable effects from your measurements
Eye Doctor II Eye Doctor II provides the channel emulation and de-embedding tools that engineers need for the next generation of serial data standards
PAM4 PAM4 signaling represents a new step in the evolution of serial data signal formats, overcoming some fundamental limitations of traditional NRZ signaling. But with new signal types come new measurement needs. Teledyne LeCroy’s PAM4 analysis package meets these needs by leveraging industry-leading eye, jitter and noise analysis capabilities to perform eye, jitter and noise analysis of PAM4 signals.
SDM Serial Data Mask Package
VirtualProbe By using VirtualProbe, you can understand the characteristics of signals where a physical probe cannot be placed, such as inside of a package or at the end of an interconnect that doesn't physically exist. You can choose to remove effects caused by elements such as fixtures that are not be present in a production configuration, and also add the effects of a device that is to be included but for which only an S-parameter model exists. Use in conjunction with SDAIII products to complete your serial data analysis solution set.
Key Features

View signals where you cannot place a probe
Model up to 6 circuit elements
Remove probe loading
De-embed fixtures
Emulate modeled channels
Multi-lane compatible
Configure up to 4 independent circuits models
With CrossLinQ and CompleteLinQ products, model crosstalk between multiple lanes
Model crosstalk with 8 and 12-port S-parameters
Included in CompleteLinQ product for signal integrity analysis
Two ways to use: Independently, or within SDAIII

View Signals Where You Cannot Place a Probe
The VirtualProbe package expands the de-embedding and emulation capabilities of EyeDoctorII. Configure a multi-block circuit using S-parameters, and VirtualProbe will build the transfer function that returns the signal as it would appear before or after any block in the circuit.
Model up to 6 Circuit Elements
Model your circuit as either a single-ended or differential lane, and configure a model using up to 6 blocks with S-parameters and transmission lines.
Remove Probe Loading Effects
It is law of physics that you cannot make a measurement without disturbing the system. VirtualProbe removes probe loading effects from your measurement, further increasing your measurement accuracy.
De-embed Fixtures
Remove the effects of fixtures from the measured waveform to improve eye and jitter measurement accuracy.
Emulate Modeled Channels
Enhance your understanding of the behavior of channels that are still in the design stage by configuring VirtualProbe for emulation using your S-parameter models or measurements.
Multi-lane Compatible
VirtualProbe is architected to meet the needs of engineers designing and testing multi-lane systems. Users can configure circuit models on up to 4 lanes, and use the "Xtalk" block to model crosstalk.
Model Crosstalk with 8 and 12 port S-parameters
Model crosstalk between lanes in multi-lane transmission systems with 8 and 12 port S-parameters measured with the Teledyne Teledyne LeCroy SPARQ or other VNA
Included in CompleteLinQ Product for Signal Integrity Analysis
VirtualProbe is included as a part of the CompleteLinQ product, allowing users to analyze virtually probed measurements, forming eye diagrams and measuring jitter, noise and crosstalk.